Steam is the most used thermal carrier in all industries, including power, steal, automotive, textile, chemical etc. And with the rapid development of science and technology, more and more steam measurement flowmeters are on the market. It is very [...]
The Important Of Dryness Of Steam Do you know that steam generated from boiler are not 100% dry? When steam boiler heats up the water, the foam on the water surface will mix some small water droplets into the [...]
For steam flow measurement leaves us below technologies to do the job. Orifice plate flow meter. Turbine Flow Meter(Bypass flowmeter) Variable Area Flow-meter Pitot tube flow meter Vortex type flow meter Each of the above flow meters has [...]
Metering technology in Heating System The normally answer will be the steam side since this side providing the usage energy. But our answer is the opposite measure the condensate can be provide the most accurate results. Why? Saturated steam [...]
The purpose of steam flow meter with temperature and pressure compensation is for when the volume deviate the actual flow compensation will correct the result well. Steam in gas status, the density varies with the changes of temperature [...]
Steam consumption measurement by flow meter Measuing steam usage with multivariable vortex meter which designed combines temperature, pressure compensation for steam mass flow measurement are becoming increasingly important in measuring steam(saturated steam or super heated steam) and gas flow. Although [...]
The defference saturated steam and superheated steamWhen water is heated beyond the boiling point, it vaporizes into steam or water in the gaseous state. Saturated steam generated when water is heated to the boiling point and when further heated above [...]
Steam Custody Transfer Meter Steam as the mainly energy is used in many manufacturing process for many different applications. The accuracy of steam flow measurement directly related to benefits supplier and demander of steam. Comate the professional fluids measurement [...]
VFM60MV DN50 DN80 Comate VFM60MV DN50 DN80 has success application in Unilever Israel proj for compressed air and steam measurement. Conditions at site: Medium: compressed air in DN80 pipe Pressure: 7~8 barG, Temperature: [...]
Steam Mass Flow Rate Calculation By Vortex Flowmeter Technology Vortex flowmeter is more often used to saturated steam and superheated steam measuring, Comate vortex flowmeter range ration can be 1:35 mostly can meet the measure requirement on the site. [...]