TGF600 Thermal Mass Flowmeters
TGF600 Inline thermal mass flowmeters with more rugged design to adapt to harsh industrial applications. It implements COMATE’s latest sensor filming technology and high sensitivity sensors to ensure a stable measurement at very low flow rate down to 0.3Nm/s.
Application:
- Compressed air, Natural gas, biogas, Oxygen, Argon, Hydrogen, special area
- Coal, power, Incineration, Landfill gas, Petrochemical industry and gas measurement in Heating supply system
- Flare gas, etc high temperature gas measurement
Special features of TGF600 Thermal Mass Flowmeters
- 100:1 turndown, lower limit to 0.3Nm/s support from 1”~80”pipe
- Temperature range up to 450 °C
- Depth scale for precise installation
- Insertion type to 16bar, special version up to 63 bar
- No moving parts, industrial sensor more robust and easy to clean
- Unique anti-ejection densign support install and remove without stop the line
- IP 67 protection.Robust water-proof housing for the indoor/outdoor area
- Inline type can be installed/removed without stopping the line
- No moving part, almost no pressure loss
- Direct mass flow measurement, do not require temperature or pressure compensation
TGF600 Series inline thermal gas flowmeters measures the gas mass flow base on thermal dispersion theory. It combines COMATE’s advanced technology on transmitter, sensor, filming and calibration, can provide stable and accurate measurement even under harsh industrial applications and require very less maintaining.
-
Insertion Type
The insertion type thermal mass flowmeters can be installed and maintained online.
-
In-line Type
The in-line type thermal mass flow meters is delivered along with a pipe which has a same inner diameters as the pipe in field.
The flanges meet ANSI,DIN or JIS standard.
-
Specifications TGF600 thermal mass flow meter
| Media Compatibility | Air, Nitrogen, O2, CO2, Argon, CH4, Natural gas, biogas, and almost all dry and clean air |
| Pipe diameter | Insertion:DN25~900mm |
| Inline: DN25~300mm | |
| Flow velocity range | 0.3~30Nm/s |
| 0.6~60Nm/s | |
| 0.9~90Nm/s | |
| 1.2~120Nm/s | |
| 1.5~150Nm/s | |
| 1.8~180Nm/s | |
| Accuracy | 1.5% RD ±0.5% FS |
| Temperature of medium | Standard: －40 ~ +150°C |
| Middle: －40 ~ +250°C | |
| High: －40 ~ +450°C | |
| Pressure of medium | Insertion: 1.6 MPa |
| Flanged insertion: 6.3 Mpa | |
| Flanged in-line: 6.3 Mpa | |
| Power supply | AC85～264V or DC16～32V |
| Response time | 1 second |
| Output | Frequency and 4~20mA as standard |
| RS~485+Bluetooth as standard | |
| Communication | 4~20mA@HART as optional |
| Date displayed | Mass flow, Total flow |
| Volume flow in normal condition | |
| Ingress protection grade | IP65 (GB China) |
| Ex-proof | NEPSI EX d II c T3 Gb |
- Max pipe size that each probe can adapt to of TGF600
| Probe length | 290mm | 440mm | 690mm | 1000mm | 1500mm |
| T<50 dgr C | DN150 | DN450 | DN900 | DN1500 | DN2500 |
| 50 dgrC <T< 150 dgr C | / | DN100 | DN600 | DN1200 | DN2200 |
| 150 dgrC <T< 250 dgr C | / | / | DN400 | DN1000 | DN2000 |
| 250 dgrC <T< 450 dgr C | / | / | DN300 | DN600 | DN1000 |
| T<122 dgr F | 6″ | 18″ | 36″ | 60″ | 100″ |
| 122 dgr F <T<302 dgr F | / | 4″ | 24″ | 48″ | 88″ |
| 302 dgr F <T<482 dgr F | / | / | 16″ | 40″ | 80″ |
| 482 dgr F <T<842 dgr F | / | / | 12” | 24” | 40” |
| 1 | General model | TGF600 | Standard | |
| 2 | Fluid type | 1 | Air/nitrogen | Standard |
| 2 | Oxygen (sensor will be degreased) | Option | ||
| 3 | Other (Please advsise gas composition) | Option | ||
| 3 | Measurement velocity | 1 | 0.3 ~ 30Nm/s | Option |
| 2 | 0.6 ~ 60Nm/s | Standard | ||
| 3 | 0.9 ~ 90Nm/s | Option | ||
| 4 | 1.2 ~ 120Nm/s | Option | ||
| 5 | 1.5 ~ 150Nm/s | Option | ||
| 6 | 1.8 ~ 180Nm/s | Option | ||
| 4 | Process connection | I1 | Insertion type with 290mm probe | Option |
| I2 | Insertion type with 440mm probe | Standard | ||
| I3 | Insertion type with 690mm probe | Option | ||
| I4 | Insertion type with 1000mm probe | Option | ||
| I5 | Insertion type with 1500mm probe | Option | ||
| F1 | Flanged insertion type up to 25 barG (362 psiG) | Option | ||
| F2 | Flanged insertion type up to 40 barG (580 psiG) | Option | ||
| F2 | Flanged insertion type up to 63 barG (913 psiG) | Option | ||
| D1 | Flanged DIN PN16 up to 16 barG (232 psiG) (DN15~DN300) | Option | ||
| D2 | Flanged DIN PN25 up to 25 barG (362 psiG) (DN15~DN300) | Option | ||
| D3 | Flanged DIN PN40 up to 40 barG (580 psiG) (DN15~DN300) | Option | ||
| D4 | Flanged DIN PN63 up to 63 barG (913 psiG) (DN15~DN300) | Option | ||
| C1 | Flanged ANSI CL150 up to 16 barG (232 psiG) (0.5 inch~12 inch) | Option | ||
| C2 | Flanged ANSI CL300 up to 40 barG (580 psiG) (0.5 inch~12 inch) | Option | ||
| C3 | Flanged ANSI CL400 up to 63 barG (913 psiG) (0.5 inch~12 inch) | Option | ||
| J1 | JIS 10K up to 16 barG (232 psiG) (DN15~DN300) | Option | ||
| J2 | JIS 20K up to 40 barG (580 psiG) (DN15~DN300) | Option | ||
| J3 | JIS 30K up to 63 barG (913 psiG) (DN15~DN300) | Option | ||
| 5 | Wet part material | 1 | 316ss sensor with 304ss wet parts | Standard |
| 2 | 316ss sensor with 316ss wet parts | Option | ||
| 6 | Medium temp range | N | ＜150°C | Standard |
| Q | ＜250°C | Option | ||
| H | ＜450°C (please select remote display also) | Option | ||
| 7 | Transmitter | T | Integral | Standard |
| R | Remote | Option | ||
| 8 | Cable grinder | M | M20x1.5 | Standard |
| N | NPT 1/2 | Option | ||
| 9 | Ex-proof | N | No Ex-proof | Standard |
| 1 | NEPSI Ex d IIC T3 Gb | Option | ||
| 10 | Transmitte | 1 | pulse/frequency + 4~20mA + RS485 + Bluetooth | Option |
| 2 | pulse/frequency + 4~20mA@HART + Bluetooth | Standard | ||
| 11 | Power supply | 1 | 13.5~42VDC | Standard |
| 2 | 13.5~42VDC with 85~265VAC 50/60Hz power converter | Option | ||
| 12 | Pipe size | xxxx | please use 4 digit pipe size, such as DN50=0050, DN300=0300 | xxxx |